Tag Archives: patching plaster

How To Repair Plaster Walls And Ceilings

How To Repair PlasterLearning how to repair plaster walls and ceilings isn’t as hard as you think. But it isn’t like drywall and uses very different techniques and materials. Plastering is an ancient art that is sadly dying in our modern era. Drywall has almost completely replaced it in North America. And it is very hard to find any tradespeople still doing it. Due to the fact that chemistry is going on during the hardening process it is quite easy to have things go wrong.

Plastering is a skilled trade and some types of plastering are simply too difficult for the average homeowner. I have tried some of them myself and the biggest issue one faces is knowing what retardants are needed to slow down the cure. Retardant information is not readily available on the internet in any meaningful form. The tradespeople aren’t giving up their secrets. ‘A few drops of dishwashing detergent’ isn’t really helpful is it? Cream of tartar supposedly works too but I’ve had no luck with it.

Having said all that I ended up using a gypsum plaster product to patch up some rather large holes I’d made in my ceiling. While it was a big very messy job I am super happy with the end result. Renovations, electrical work and plumbing problems often require plaster repair work in your house. Watch the video or continue reading and you can learn how to repair plaster walls and ceilings too.

Materials needed

Don’t use straight plaster of Paris. It will set up before you can get it out of the bucket. Use Durabond 90 instead. It’s a plaster of Paris based product with premixed retardant. It will give you around an hour of working time. Use general purpose sand for your 1st and 2nd layers. You can use metal lath, or wood if you prefer. The wood should be roughly an inch and a bit wide and a quarter inch thick. Plaster bonder is also a great idea as it really helps with adhesion. It’s a latex product that washes up with water. Get some galvanized nails for fixing down the lath.

Tools

Hammer and chisel for opening up the plaster. Heavy tin snips for cutting metal lath. Small saw for cutting wood lath. A couple of buckets. Mixer attachment and drill. Float, trowels or putty knife. Paint brush. Spray bottle

Plaster wall and ceiling construction

Plaster construction has two parts, the foundation called lath, and the plaster that is spread through it and on top of it.

Lath nowadays is a metal screen-like material but earlier construction is thin strips of wood. In both cases the lath is fastened to the ceiling joists or wall studs. When repairing or restoring a plaster surface it’s important that the lath is secure and sound.

Plaster can be gypsum or lime based or even a mix of the two. Lime plaster is the oldest type, made by burning limestone in a kiln. The resulting lime is used for plastering and for cement. Gypsum plaster, known as plaster of Paris is also made by heating in a kiln.

Lime plaster is the superior choice especially for kitchens and baths but it’s much harder to work with. For general interior work gypsum based materials are a better choice for amateurs.

Working with the plaster

Plastering is usually done in 2 or 3 coats. You can spread the coats out over a few days or even do them all on the same day. The existing plaster and lath needs to be slightly damp. Each coat of new plaster should be misted with a squirt bottle before the next coat is applied as well.

The first coat, called the scratch coat, is a mixture of sand and plaster. In older homes it often had horse hair or other fibres to help it stick to the lath. Applying the scratch coat is tricky. The plaster is more or less squeezed through the holes or gaps in the lath. Lots of it can end up on the floor or on your head.

How To Repair Plaster

The second coat goes on much easier as most of the holes and gaps in the lath will already be filled in. This coat is a mix of sand and plaster as well. This coat should sit a bit below the final surface to leave room for the finish coat.

The finish coat is straight plaster. It should be fairly thin, perhaps a ΒΌ inch or so. Before laying this coat it’s a good idea to scrape down any areas of existing plaster that have sand stuck to them. You can see me do this with the edge of my float in the video several times. Doing this will keep sand out of the finish coat. Hopefully you can get a nice smooth surface with your trowel on your first attempt. Doing so will save you a lot of very difficult sanding once everything is hard and dry. Now you know how to repair plaster walls and ceilings in your home!